CHURCH AND SYNAGOGUE LIBRARY ASSOCIATION. FIFTEEN YEARS OF ECUMENICAL CONCERN FOR QUALITY SERVICE IN RELIGIOUS LIBRARIESHANNAFORD C.1983; SPECIAL LIBRARIES; ISSN 0038-6723; USA; DA. 1983; VOL. 74; NO 3; PP. 271-277Article

The electrical design for manufacture of ceramic capacitorsHANNAFORD, C. D; INGLESON, H.Quality and reliability engineering international. 1993, Vol 9, Num 2, pp 121-125, issn 0748-8017Article

Coding for both protection and synchronisationCOULTON, P; HANNAFORD, C; HONARY, B et al.IEE proceedings. Communications. 1995, Vol 142, Num 6, pp 352-356, issn 1350-2425Article

Psychophysiological effects of a running program on depression and anxiety in a psychiatric populationHANNAFORD, C. P; HARRELL, E. H; COX, K et al.The Psychological record. 1988, Vol 38, Num 1, pp 37-48, issn 0033-2933Article

Development of 32 and 34 strand inner cables for the SSCL make magnet programSEUNTJENS, J. M; CLINE, P. G; GRAHAM, S. O et al.Advances in cryogenic engineering. 1994, Vol 40, pp 787-792, issn 0065-2482, AConference Paper

Mechanical design of HD2, a 15 T Nb₃Sn dipole magnet with a 35 mm boreFERRACIN, P; BARTLETT, S. E; SABBI, G. L et al.IEEE transactions on applied superconductivity. 2006, Vol 16, Num 2, pp 378-381, issn 1051-8223, 4 p.Conference Paper

An R&D approach to the development of long Nb₃Sn accelerator magnets using the key and bladder technologyBARTLETT, S. E; CASPI, S; SABBI, G et al.IEEE transactions on applied superconductivity. 2005, Vol 15, Num 2, pp 1136-1139, issn 1051-8223, 4 p., 2Conference Paper

Design of HD2: A 15 tesla Nb₃Sn dipole with a 35 mm boreSABBI, G; BARTLETT, S. E; MCINTURFF, A. D et al.IEEE transactions on applied superconductivity. 2005, Vol 15, Num 2, pp 1128-1131, issn 1051-8223, 4 p., 2Conference Paper

Measured strain in Nb₃Sn coils during excitation and quenchCASPI, S; BARTLETT, S. E; SABBI, G et al.IEEE transactions on applied superconductivity. 2005, Vol 15, Num 2, pp 1461-1464, issn 1051-8223, 4 p., 2Conference Paper

Progress in Wind-and-React Bi-2212 Accelerator Magnet TechnologyGODEKE, Arno; CHENG, D. W; DIETDERICH, Daniel R et al.IEEE transactions on applied superconductivity. 2009, Vol 19, Num 3, pp 2228-2231, issn 1051-8223, 4 p., 2Conference Paper

Mechanical design of a second generation LHC IR quadrupoleCASPI, S; BARTLETT, S. E; SCANLAN, R. M et al.IEEE transactions on applied superconductivity. 2004, Vol 14, Num 2, pp 235-238, issn 1051-8223, 4 p.Conference Paper

Development of Wind-and-React Bi-2212 Accelerator Magnet TechnologyGODEKE, A; CHENG, D; NISHIOKA, J et al.IEEE transactions on applied superconductivity. 2008, Vol 18, Num 2, pp 516-519, issn 1051-8223, 4 p.Conference Paper

Development of the 15 T Nb₃Sn Dipole HD2FERRACIN, P; CASPI, S; SABBI, G et al.IEEE transactions on applied superconductivity. 2008, Vol 18, Num 2, pp 277-280, issn 1051-8223, 4 p.Conference Paper

Design of HQ-A High Field Large Bore Nb₃Sn Quadrupole Magnet for LARPFELICE, Helene; AMBROSIO, Giorgio; HANNAFORD, C. R et al.IEEE transactions on applied superconductivity. 2009, Vol 19, Num 3, pp 1235-1239, issn 1051-8223, 5 p., 2Conference Paper

Test results of HD1b, an upgraded 16 tesla Nb₃Sn dipole magnetLIETZKE, A. F; BARTLETT, S. E; LAU, W et al.IEEE transactions on applied superconductivity. 2005, Vol 15, Num 2, pp 1123-1127, issn 1051-8223, 5 p., 2Conference Paper

Performance analysis of HD1: A 16 tesla Nb₃Sn dipole magnetMATTAFIRRI, S; BARTLETT, S. E; LIETZKE, A. F et al.IEEE transactions on applied superconductivity. 2005, Vol 15, Num 2, pp 1156-1159, issn 1051-8223, 4 p., 2Conference Paper

Fabrication and Test of a 3.7 m Long Support Structure for the LARP Nb₃Sn Quadrupole Magnet LQS01FERRACIN, Paolo; AMBROSIO, Giorgio; NOBREGA, F et al.IEEE transactions on applied superconductivity. 2009, Vol 19, Num 3, pp 1106-1111, issn 1051-8223, 6 p., 2Conference Paper

Recent Test Results of the High Field Nb₃Sn Dipoles Magnet HD2FERRACIN, P; BINGHAM, B; LIZARAZO, J et al.IEEE transactions on applied superconductivity. 2010, Vol 20, Num 3, pp 292-295, issn 1051-8223, 4 p.Conference Paper

Assembly and Test of HD2, a 36 mm Bore High Field Nb₃Sn Dipole MagnetFERRACIN, Paolo; BINGHAM, Brad; LIETZKE, A. F et al.IEEE transactions on applied superconductivity. 2009, Vol 19, Num 3, pp 1240-1243, issn 1051-8223, 4 p., 2Conference Paper

Assembly and Test of a Support Structure for 3.6 m Long Nb₃Sn Racetrack CoilsFERRACIN, P; AMBROSIO, G; MURATORE, J et al.IEEE transactions on applied superconductivity. 2008, Vol 18, Num 2, pp 167-170, issn 1051-8223, 4 p.Conference Paper

Assembly and tests of SQ02, a Nb₃Sn racetrack quadrupole magnet for LARPFERRACIN, P; AMBROSIO, G; LIETZKE, A. F et al.IEEE transactions on applied superconductivity. 2007, Vol 17, Num 2, pp 1019-1022, issn 1051-8223, 4 p., 2Conference Paper

Effect of Axial Loading on Quench Performance in Nb₃Sn MagnetsFERRACIN, P; AMBROSIO, G; MCLNTURFF, A. D et al.IEEE transactions on applied superconductivity. 2008, Vol 18, Num 2, pp 285-288, issn 1051-8223, 4 p.Conference Paper

Test Results of 15 T Nb₃Sn Quadrupole Magnet HQ01 with a 120 mm Bore for the LHC Luminosity UpgradeCASPI, S; AMBROSIO, G; FERRACIN, P et al.IEEE transactions on applied superconductivity. 2011, Vol 21, Num 3, pp 1854-1857, issn 1051-8223, 4 p., 2Conference Paper

HD1: Design and fabrication of a 16 tesla Nb₃Sn dipole magnetHAFALIA, A. R; BARTLETT, S. E; LIETZKE, A. F et al.IEEE transactions on applied superconductivity. 2004, Vol 14, Num 2, pp 283-286, issn 1051-8223, 4 p.Conference Paper

Assembly and Loading of LQS01, a Shell-Based 3.7 m Long Nb₃Sn Quadrupole Magnet for LARPFERRACIN, P; AMBROSIO, G; HANNAFORD, C. R et al.IEEE transactions on applied superconductivity. 2010, Vol 20, Num 3, pp 279-282, issn 1051-8223, 4 p.Conference Paper